![background image](http://html1.mh-extra.com/html/icom/ic-m604a/ic-m604a_instruction-manual_2037992057.webp)
51
9
CONNECTIONS AND MAINTENANCE
9
• NMEA PIN ASSIGNMENT
y
DC POWER CONNECTOR
Connect the supplied DC power cable from this connector
to an external 13.8 V DC power source.
CAUTION:
After connecting the DC power cable, wrap
the connectors with a rubber vulcanizing tape, to
prevent water seeping into the transceiver.
Rubber vulcanizing tape
■
Fuse replacement
A fuse is installed in the supplied DC power cable. If the fuse
blows, track down the source of the problem, have it repaired,
and replace the damaged fuse with a new rated one.
Fuse rating: 10 A
■
Supplied accessories
The following accessories are supplied.
Mounting bracket
For the mounting bracket
Knob bolts
Screws (5
×
20)
Flat washers (M5)
Spring washers (M5)
Microphone hanger
and screws (3
×
16)
Microphone
DC power cable
Warning sticker
Sponges
Accessory connectors
(3 pin, 6 pin)
■
Antenna
A key element in the performance of any communication
system is the antenna. Ask your dealer about antennas and
the best place to mount them.
NMEAOUT (+)
NMEAOUT (–)
NMEAIN (+)
Lead 3 of OPC-2014
Lead 5 of OPC-2014
Lead 2 of OPC-2014
Lead 4 of OPC-2014
NMEAIN (–)
Transceiver’s rear panel view