![background image](http://html1.mh-extra.com/html/icom/ic-m604a/ic-m604a_instruction-manual_2037992059.webp)
53
9
CONNECTIONS AND MAINTENANCE
9
■
MB-75 installation
An optional MB-75
flush
mount
kit
is available for mounting
the transceiver to a flat surface such as an instrument panel.
KEEP
the transceiver and microphone at least 1 m (3.3 ft)
away from the vessel’s magnetic navigation compass.
q
Using the attached template, carefully cut a hole into
the instrument panel (or wherever you plan to mount the
transceiver).
w
Slide the transceiver into the hole as shown below.
e
Attach the 2 supplied bolts (M5
×
8 mm) on either side of
the IC-M604A.
r
Attach the clamps on either side of the IC-M604A.
• Make sure that the clamps align parallel to the IC-M604A’s body.
Clamp
Supplied bolt
t
Tighten the end bolts on the clamps (rotate clockwise)
so that the clamps press firmly against the inside of the
instrument control panel. (Torque: 0.6 N.m)
y
Tighten the locking nuts (rotate counterclockwise) so that
the IC-M604A is securely mounted into position.
End bolt
Locking nut
t
y
u
Connect the antenna and power cable.