Icom IC-M603 Instruction Manual Download Page 48

Page: 48 / 64

OTHER FUNCTIONS

New2001

Push

[

]

, then push

[8•

]

to enter auto foghorn mode.

Rotate

[SELECTOR]

to select the desired foghorn pattern,

push

[ENT]

• ‘UNDERWAY,’ ‘STOP,’ ‘SAIL,’ ‘TOW’ are available. (p. 41)
• Even if

[ENT]

hasn’t been pushed, the display automatically

changes to the next step after about 5 sec. of inactivity.

Rotate

[SELECTOR]

to adjust the foghorn level, push

[ENT]

• The foghorn level is adjustable in 31 steps.
• Even if

[ENT]

hasn’t been pushed, the display automatically

changes to the next step after about 5 sec. of inactivity.

To return to normal operation, repeat step

When a DSC call is received, the automatic foghorn func-
tion is interrupted with an automatic return to the trans-
ceiver mode. The transceiver’s display indicates ‘Receiv-
ing DSC calls.’ (p. 32)

■

RX speaker function

The IC-M603 has an RX speaker function. When this func-
tion is turned ON, the received audio can be heard on the
deck or tower via a hailer speaker.

Connect a hailer speaker as described on p. 46.

Push

[

]

, then push and hold

[7•

]

for 1 sec. to enter

the RX Speaker mode.

• “

” appears.

Rotate

[SELECTOR]

to adjust the audio output level, push

[ENT]

To return to normal operation, repeat step

While in the RX speaker mode, rotate

[SELECTOR]

while

pushing and holding

[7•

]

after pushing

[

]

, to adjust

the audio output level. After adjusting, push

[ENT]

• Rotate

[SELECTOR]

within 1 sec. after pushing

[7•

]

. Oth-

erwise the transceiver returns to the normal operation.

HAIL

25W

INT

TAG

RX
15

<ENT

<ENT˘OK>

OK>

CALLING

Push ,

then push and hold

for 1 sec.

HAIL

25W

INT

TAG

FOGHORN

FOGHORN
15

<ENT

<ENT˘OK>

OK>

CALLING

25W

INT

TAG

FOGHORN

FOGHORN
15

UNDERWAY

CALLING

Rotate

Push

The foghorn pattern, selected
in step

, is displayed.

Foghorn
level

25W

INT

TAG

UNDERWAY

UNDERWAY
STOP

STOP

<ENT

<ENT˘OK>

OK>

CALLING

then push

Push ,

FOG

!IC-M603.qxd 06.7.28 1:46 PM Page 42 (1,1)

Summary of Contents for IC-M603

































































Search results

Summary of Contents for IC-M603

Reviews:

Related manuals for IC-M603

Brands by name

Popular brands

Icom IC-M603, Instruction Manual

Search results

Summary of Contents for IC-M603

Reviews:

Related manuals for IC-M603

Brands by name

Popular brands