![background image](http://html1.mh-extra.com/html/icom/ic-m603/ic-m603_instruction-manual_2037984055.webp)
49
9
CONNECTIONS AND MAINTENANCE
New2001
9
■
MB-75 installation
An optional MB-75
FLUSH MOUNT KIT
is available for mounting
the transceiver to a flat surface such as an instrument panel.
CAUTION: KEEP
the transceiver and microphone at least
1 meter away from your vessel’s magnetic navigation com-
pass.
q
Using the attached template, carefully cut a hole into the
instrument panel (or wherever you plan to mount the trans-
ceiver).
w
Slide the transceiver through the hole as shown below.
e
Attach the 2 supplied bolts (M5
×
8 mm) on either side of
the IC-M603.
r
Attach the clamps on either side of the IC-M603.
• Make sure that the clamps align parallel to the IC-M603’s body.
t
Tighten the end bolts on the clamps (rotate clockwise) so
that the clamps press firmly against the inside of the in-
strument control panel.
y
Tighten the locking nuts (rotate counterclockwise) so that
the IC-M603 is securely mounted in position as below.
u
Connect the antenna and power cable, then return the in-
strument control panel to its original place.
End bolt
Locking nut
t
y
Clamp
Supplied bolt
!IC-M603.qxd 06.7.28 1:46 PM Page 49 (1,1)