![background image](http://html1.mh-extra.com/html/icom/ic-m603/ic-m603_instruction-manual_2037984057.webp)
51
9
CONNECTIONS AND MAINTENANCE
New2001
9
■
HM-162E installation
The optional HM-162E should be installed to the transceiver
using the supplied connection cable.
The connector of the connection cable can be installed into a
cabinet, wall, etc., as a built-in plug.
For longer distance remote operation, the optional extension
cable, OPC-1541 (6 m; connecting between transceiver and
the connection cable), is available, and up to two OPC-1541
can be added.
Do not connect the HM-162E to the OPC-1000.
q
Insert the supplied cable into the [COMMAND MIC-1] or
[COMMAND MIC-2] connector and tighten the cable nut
as shown below.
• Up to two COMMANDMICIII™s can be connected simultaneously.
w
To use the supplied cable as a wall socket, perform the fol-
lowing steps.
e
Using the mounting base as a template, carefully mark the
holes where the cable and three screws will be fastened.
r
Drill holes at these marks.
t
Install the mounting base using the supplied screws as
shown below.
Gasket
Cap
Mounting base
Nut
Screw holes
(approx. 2 (d) mm)
Completed
[COMMAND MIC-2]
[COMMAND MIC-1]
HM-162E
!IC-M603.qxd 06.7.28 1:46 PM Page 51 (1,1)