27
7
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Transmitting DSC calls
To ensure correct operation of the DSC function, make
sure you correctly set the CH70 SQL Level. (p. 64)
D
Transmitting an individual call
The Individual call function enables you to transmit a DSC
signal to only a specific station.
q
Select “INDIVIDUAL CALL” in the DSC CALLS menu.
MENU
➪
DSC
➪
Individual Call
(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)
w
Select the desired preset individual address, or “Manual
Input,” using dial or [
Y
]/[
Z
], then push [ENT].
• The ID code for the Individual call can be set first. (p. 18)
• When “Manual Input” is selected, enter the 9 digit MMSI ID code
for the individual you wish to call.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
About Manual Inputting:
Enter a individual ID in the following way:
• Select a number using [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] or dial to set it.
• To move the cursor, rotate dial or
select either arrow, “
←
” or “
→
,”
then push [ENT] or dial.
• The first digit is specified as ‘0’ for a Group ID. If a 9 digit Group
ID is entered, an error beep sounds when pushing [ENT] or dial.
• The first two digits are ‘0’ for any coast station ID.
NOTE:
When a coast station is selected in step
w
, the
voice channel is automatically specified by the coast sta-
tion. Therefore, skip step
e
and go directly to step
r
.
+
Continued on the next page.
Summary of Contents for IC-M506GE
Page 1: ...INSTRUCTION MANUAL iM506GE VHF MARINE TRANSCEIVERS iM506...
Page 116: ......