54
54
7
DSC OPERATION
D
Receiving a Position Request Call
When a Position Request Call is received:
➥
The alarm sounds for 2 minutes.
➥
“RCVD POS REQUEST” appears. The backlight blinks for
2 minutes.
q
Push [ALARM OFF] to stop the alarm and the blinking
backlight.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step
w
is displayed.
w
Push a softkey to select your desired action.
[IGN]
➥
Push to ignore the Call and return to the normal operat-
ing mode.
• The transceiver exits the DSC mode.
• The “
” icon continues to blink and the Call is stored in the
Received Call Log.
[INFO]
➥
Push to display the Received call information. (p. 58)
[ACK]
➥
Push to display the “POSITION REPLY” screen and
send a reply to the Call. (p. 40)
When “POSITION ACK” is set to “Auto,” the transceiver au-
tomatically replies to the Call. In that case, both the TX and
RX calls are stored in the Transmitted and Received Call
Logs.
Summary of Contents for IC-M506GE
Page 1: ...INSTRUCTION MANUAL iM506GE VHF MARINE TRANSCEIVERS iM506...
Page 116: ......