38
7
DSC OPERATION
New2001
D
Transmitting a Test Acknowledgement call
When the “TEST ACK” in DSC settings is set to ‘Auto’ (p. 61),
the transceiver automatically transmits a reply call when re-
ceiving a Test call.
Quick ACK:
q
When a Test call is received, alarm sounds and the screen
shown below is displayed.
Push [ALARM OFF] to stop the alarm.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step
w
is displayed.
w
Push [ACK].
• Push [IGN] to ignore the call and return to the normal operating
mode.
• Push [INFO] to display the Test call information.
About Received call information:
• Push [IGN] to ignore the call and return to the normal operating
mode.
• Push [BACK] to return to the previous screen.
• Push [ACK] to go to the next step.
e
The Test ACK confirmation
screen is displayed.
Push [CALL] to transmit the
acknowledgement call.
•
Push [EXIT] to return to the
normal operating mode.
r
While transmitting the ac-
knowledgement call, the
screen shown to the right is
displayed, and then returns
to the normal operating
mode.
Summary of Contents for IC-M506GE
Page 1: ...INSTRUCTION MANUAL iM506GE VHF MARINE TRANSCEIVERS iM506...
Page 116: ......