![background image](http://html1.mh-extra.com/html/icom/ic-m423ge/ic-m423ge_instruction-manual_4301967099.webp)
89
10
CONNECTIONS AND MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Microphone installation
The optional HM-195 should be connected to the transceiver
using the supplied OPC-1540 connection cable.
The cable is used to operate from a longer distance. The
cable connector can also be installed as a built-in plug on a
cabinet or wall.
To operate from even longer distances, the optional 6 meter
long OPC-1541 extension cable can be used between the
transceiver and the OPC-1540. Up to two OPC-1541 can be
added.
D
Installation
q
Insert the OPC-1540 cable connector into the command
microphone jack, and tighten the nut.
w
To use the cable connector as a wall socket, install it as
described to the right.
e
Using the mounting base as a template, carefully mark the
holes where the cable and three screws will be fastened.
r
Drill holes at these marks.
t
Install the mounting base using the supplied screws, as
shown below.
Gasket
Cap
Mounting base
Nut
Screw holes
(approx. 2 (d) mm;
3
⁄
32
˝)
y
The completed installation should look like this.
Summary of Contents for IC-M423GE
Page 100: ...90 10 CONNECTIONS AND MAINTENANCE Gasket Mounting base Cap Nut...
Page 106: ......