![background image](http://html1.mh-extra.com/html/icom/ic-m423ge/ic-m423ge_instruction-manual_4301967038.webp)
28
7
DSC OPERATION
■
Making a Distress call (Continued)
t
After transmitting the call, the transceiver waits for an ac-
knowledgment call.
• The Distress call is automatically transmitted every 3.5 to 4.5
minutes, until an acknowledgement is received (‘Call repeat’
mode), or DSC cancel call is made. (p. 29)
• Push [RESEND] to manually transmit the Distress repeat call.
• Push [
Ω
]/[
≈
] then push [INFO] to display the transmitted Dis-
tress call information.
• Push [
Ω
]/[
≈
] then push [PAUSE] to pause the ‘Call repeat’ mode,
push [RESUME] to resume it.
y
After receiving an acknowledgment call, push [ALARM
OFF] then reply using the microphone.
➥
A distress alert contains:
• Nature of distress:
Selected in step
w
.
• Position information:
The latest GPS or manually entered
position is held for 23.5 hours, or until
the power is turned OFF.
When no GPS receiver is connected and built-in GPS re-
ceiver* is not receiving valid position data, and both posi-
tion and time have been manually entered, the screen as
shown below is displayed. Edit your latitude and longitude
position and UTC time as follows:
*For only the IC-M423G, IC-M423GE, and IC-M424G.
➥
Push [CHG], then edit your latitude and longitude posi-
tion and UTC time.
• Select a desired number using Dial, or [
Y
]/[
Z
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• Select N (North latitude) or S (South latitude) when the cursor
is on the ‘N’ or ‘S’ position.
• Select W (West longitude) or E (East longitude) when the cur-
sor is on the ‘W’ or ‘E’ position.
Summary of Contents for IC-M423GE
Page 100: ...90 10 CONNECTIONS AND MAINTENANCE Gasket Mounting base Cap Nut...
Page 106: ......