![background image](http://html1.mh-extra.com/html/icom/ic-m423ge/ic-m423ge_instruction-manual_4301967047.webp)
37
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
e
Select a desired intership channel using Dial or [
Y
]/[
Z
],
then push [ENT].
• Intership channels are already preset into the transceiver in the
recommended order.
About Manual Entry:
Enter a desired group ID in the following way:
• Select a desired number using Dial, or [
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• The first digit is specified as ‘0,’ and the second digit is other than
‘0’ for a Group ID.
• The first two digits are ‘0’ for any Coast station ID.
r
A confirmation screen is displayed.
• Confirm the call contents.
t
Push [CALL] to make a Group call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
y
After the Group call has been transmitted, the following
screen is displayed.
u
Announce the information using the microphone.
i
After the announcement, push [EXIT] to return to the nor-
mal operating mode.*
* Only USA version, the exit confirmation dialog (p. 29) is displayed.
• Only USA version, push [RESEND] to resend the call.
Displayed
for only USA
version.
Summary of Contents for IC-M423GE
Page 100: ...90 10 CONNECTIONS AND MAINTENANCE Gasket Mounting base Cap Nut...
Page 106: ......