![background image](http://html1.mh-extra.com/html/icom/ic-m423ge/ic-m423ge_instruction-manual_4301967042.webp)
32
7
DSC OPERATION
■
Making DSC calls
To ensure correct operation of the DSC function, make
sure you correctly set the CH70 SQL LEVEL. (p. 67)
D
Making an individual call
The Individual call function allows you to make a DSC call to
only a specific station.
q
Enter “INDIVIDUAL CALL” in the DSC CALLS menu.
MENU
➪
DSC Calls
➪
Individual Call
(Push [MENU].) (Rotate Dial, then push [ENT].)
w
Select a desired preset individual address, or “Manual In-
put,” using Dial or [
Y
]/[
Z
], then push Dial or [ENT].
• The ID code for the Individual call can be entered first. (p. 22)
• When “Manual Input” is selected, enter a desired 9 digit MMSI ID
code for the individual you wish to call.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
About Manual Entry:
Enter a desired individual ID in the following way:
• Select a desired number using Dial, or [
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• The first digit is specified as ‘0’ for a Group ID. If a 9 digit Group
ID is entered, an error beep sounds when pushing [ENT] or dial.
• The first two digits are ‘0’ for any coast station ID.
NOTE:
When a coast station is selected in step
w
, the
voice channel is automatically specified by the coast sta-
tion. Therefore, skip step
e
and go directly to step
r
.
Summary of Contents for IC-M423GE
Page 100: ...90 10 CONNECTIONS AND MAINTENANCE Gasket Mounting base Cap Nut...
Page 106: ......