![background image](http://html1.mh-extra.com/html/icom/ic-m423ge/ic-m423ge_instruction-manual_4301967017.webp)
7
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
!7
POSITION INDICATOR
➥
➥ ➥
Shows the current position when position data is re-
ceived, or the position is manually entered.
• When the GPS position is invalid, “??” may blink every 2 sec-
onds instead of position. The last position is held for only
23.5 hours, and after that, “NO POSITION” is displayed.
• “??” will blink every 2 seconds instead of position, after 4
hours* have passed from the time when the position is manu-
ally entered. The manually entered position is held for only 23.5
hours, and after that, “NO POSITION” is displayed.
*3 hours and 59 minutes for USA version.
➥
➥ ➥
“NO POSITION” is displayed when no GPS receiver is
connected, and no position is manually entered.
!8
SCAN INDICATOR
➥
“SCAN 16” is displayed during a Priority scan; “SCAN”
is displayed during a Normal scan. (p. 20)
➥
“DUAL 16” is displayed during Dualwatch; “TRI 16” is
displayed during Tri-watch. (p. 20)
!9
LOCAL ICON*
(p. 14)
Displayed when the Attenuator function is turned ON.
*For only USA and Australian version transceivers.
■
Softkey function
Various functions can be assigned to the softkeys. When a
key function is assigned, the key icon is displayed above the
softkey, as shown below.
D
Softkey function selection
When “
Ω
” or “
≈
” is displayed beside the key icon, sequentially
pushing [
Ω
]/[
≈
] displays the previous or the next key function
that is assigned to the softkey.
Push
Push
*
*Push this key to start
and stop scan.
The order of the key icons may differ, depending on the
version or presetting.
Summary of Contents for IC-M423GE
Page 100: ...90 10 CONNECTIONS AND MAINTENANCE Gasket Mounting base Cap Nut...
Page 106: ......