Icom IC-G80 Instruction Manual Download

Page: 2 / 48

FOREWORD

Thank you for purchasing this fine Icom product. The
IC-G80

vhf

transceiver

is designed and build with Icom’s

superior technology and craftsmanship. With proper care, this
product should provide you with years of trouble-free opera-
tion.

FEATURES

❍

Dust-protection/Splash-resistant construc-

tion (IP54*)

* Only when the battery pack or case, antenna and jack cover are

attached.

❍

Built in VOX circuit enabling VOX operation*

(Voice Operated Transmission)

* To use the VOX function, an optional headset and a plug adapter

cable are required.

EXPLICIT DEFINITIONS

WORD

DEFINITION

DANGER!

Personal death, serious injury or an ex-
plosion may occur.

WARNING!

Personal injury, fire hazard or electric
shock may occur.

CAUTION

Equipment damage may occur.

NOTE

Recommended for optimum use. No risk
of personal injury, fire or electric shock.

IMPORTANT

READ ALL INSTRUCTIONS

carefully and completely

before using the transceiver.

SAVE THIS INSTRUCTION MANUAL—

This in-

struction manual contains important operating instructions
for the IC-G80.

Summary of Contents for IC-G80

















































Search results

Summary of Contents for IC-G80

Reviews:

Related manuals for IC-G80

Brands by name

Popular brands

Icom IC-G80, Instruction Manual

Search results

Summary of Contents for IC-G80

Reviews:

Related manuals for IC-G80

Brands by name

Popular brands