![background image](http://html.mh-extra.com/html/icom/ic-g80/ic-g80_instruction-manual_612689030.webp)
25
7
TONE SQUELCH AND POCKET BEEP
■
Tone/DTCS squelch and pocket beep (Continued)
D
Setting DTCS polarity
For DTCS operation, the polarity setting is configurable, as
well as the code setting. If the polarity is different, the DTCS
squelch never opens, even when receiving a signal that in-
cludes a matching DTCS code.
q
Push
[FUNC](
M
), and then [SET](8) to enter the Set mode.
w
Push
[
] or [
] to select the DTCS polarity item (dtP).
e
Rotate
[VOL] to select a polarity setting between “dtP.nn”
(TX and RX normal)
, “dtP.nR”
(TX: normal, RX: reverse)
, “dtP.
Rn”
(TX: reverse, RX: normal)
and “dtP.RR”
(TX and RX re-
verse)
.
r
Push
[# ENT](MN.W) to exit the Set mode.
NOTE: When you use the DTCS encoder, the DTCS po-
larity setting affects only transmitting.
D
Operation
q
Select an operating channel (p. 15), and then set a CTCSS
tone or a DTCS code (p. 24).
w
Push
[FUNC](
M
), and then [TONE](1).
• Repeat step
w
one or more times to activate the desired Tone function.
e
Operate the transceiver in a normal way. (p. 15)
NOTE: The Tone function is automatically returned to the
setting pre-programmed by your dealer, if you change the
operating channel.
TX and RX: Normal polarity
TX: Normal, RX: Reverse
TX: Reverse, RX: Normal
TX/RX: Reverse polarity
Function OFF
: Push , and then .
Tone squelch with
pocket beep
Tone squelch
DTCS squelch
DTCS squelch with pocket beep
Repeater tone encoder
DTCS encoder