32
10
9
SET MODES
D
Scan resume setting
Selects the scan resume setting between SCt. 5, SCt. 10,
SCt. 15, and SCP. 2.
When a signal is received during a scan, the scan pauses
and then resumes, according to the scan resume setting.
• SCt. 5/10/15 : The scan pauses for 5, 10 or 15 seconds, and then
resumes.
• SCP.2
: The scan pauses until the received signal disappears,
and then resumes after 2 seconds.
D
Function key timer
Push
[FUNC](
M
) to enter the Function mode, and then push
a keypad key to activate its second function.
• During the Function mode, “
” is displayed on the LCD.
Sets the time between when the Function mode is entered,
and how long it remains activated after you push the keypad
key to activate its second function.
• F0.At
: Exit the Function mode immediately after a key is pushed
to activate its second function.
• F1/2/3.At : The Function mode remains activated for 1, 2 or 3 sec-
onds after a key is pushed to activate its second function.
• F .m
: The Function mode remains activated until
[FUNC](
M
) is
pushed again, even after a key is pushed to activate its
second function.
D
LCD backlight
Selects the LCD Backlight function.
• LIG.OF : Turns OFF the Backlight function.
• LIG.ON : Lights continuously while the transceiver is ON.
• LIG.At
: Turns ON when an operation occurs, and turns OFF
after 5
seconds.
D
VOX gain
Sets the VOX gain to between 1 and 10. Higher values make
the VOX function more sensitive to your voice.
To turn OFF the VOX function, select “VOX.OF.”
NOTE: Set the microphone gain before setting the VOX
gain. See page 42 for details of the VOX function.
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
