manualshive.com logo in svg

Icom IC-G80, Instruction Manual

Share
Download
Icom IC-G80 Instruction Manual Download Page 40

35

9

SET MODES

■

 Initial Set mode items

D

  Key-touch beep

Turns the key-touch beep ON (the beep level 1 to 3) or OFF.

•  When changing the beep level, beeps sound at the level. 

D

  Time-out timer

To prevent accidental prolonged transmission, the transceiver 
has a Time-out Timer. This function cuts transmission OFF 
after 1 to 30 minute of continuous transmission. 
To turn OFF the function, select “tot.OF.”

•  tot.OF 

:  Turns OFF the function.

•  tot.1 to 30 :  If continuous transmission exceeds the selected time pe-

riod (1 to 30 minutes), the transmission will be cut off.

Approximately 10 

seconds

 before the Time-out Timer is ac-

tivated, the transceiver sounds a beep tone as a warning.

Be careful! When using the BP-263 battery case, the bat-
teries will become hot if this Time-out Timer function is 
turned OFF or set to a long time period, and transmission 
is made for long periods.

D

  Auto power-OFF

The  transceiver  can  automatically  turn  itself  OFF  after  a 
specified time. Activating a control or receiving a signal re-
starts the time-out. The transceiver beeps before turning OFF. 
30 minutes, 1 hour, 2 hours and OFF can be specified. The 
specified time period is retained even when the transceiver is 
turned OFF by the Auto Power OFF function. To cancel the 
function, select "POF.OF."

•  POF.OF 

:  Turns OFF the function.

•  POF.30/1H/2H  :  The transceiver is automatically turned OFF when no 

operation occurs during the selected time period.

D

  Lockout

Select a Lockout function option.

•  RLO.OF  :  Turns OFF the function. 
•  RLO.RP  :  The Repeater Lockout Inhibits transmitting when the 

channel is busy, except while receiving a signal that in-
cludes a matching repeater tone.

•  RLO.bU  :  The Busy Lockout Inhibits transmitting when the channel 

is busy.

Summary of Contents for IC-G80

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands