Icom IC-F9020 SERIES, Operating Manual

Page: 47 / 52

44
4
TACTICAL GROUP FUNCTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
n
Tactical Group function
The Tactcal Group functon enables commonly used chan-
nels to be placed together n zone 128.
IMPORTANT!
The tactcal group operaton should be enabled by your
dealer wth the CS-F9010/F9510
cloning software
. Ask
your dealer for detals.
Non-dsplay types can be operated only as the sub trans-
cever.
D Creating the tactical group in zone 128
— Individual channel copy
q
Push [CH Up] or [CH Down] , or rotate [CH Up/Down] to
select the channel whch you wsh to copy to zone 128,
then turn power OFF.
w
For Handheld types:
Whle pushng [I] and [III] , rotate [VOL] to turn power ON.
For Mobile types:
Whle pushng [P1] and [P3] , push [ ] to turn power ON.
• “
COPY ?
” s dsplayed.
• When all 512 channels are already used, the transcever has no
capacty. “
NOT COPY
” s dsplayed for 2 sec. and error beeps
sound.
• Turn power OFF to cancel copy.
e
Push
[
Ω
]
(for Handhelds)
or
[P0]
(for Mobles)
to copy the se-
lected channel to zone 128.
• “
COPIED
” s dsplayed.
D Creating the tactical group in zone 128
— Zone copy
q
Push [CH Up] or [CH Down] , or rotate [CH Up/Down] to
select the channel belongng to the zone whch you wsh
to copy to zone 128, then turn power OFF.
w
For Handheld types:
Whle pushng [I] and [ III ] , rotate [VOL] to turn power ON.
For Mobile types:
Whle pushng [P1] and [P3] , push [ ] to turn power
ON.
• “ COPY ? ” s dsplayed.
• When all 512 channels are already used, the transcever has no
capacty. “ NOT COPY ” s dsplayed for 2 sec. and error beeps
are emtted.
• Turn power OFF to cancel copy.
e
Push [CH Up] or [CH Down] , or rotate [CH Up/Down] to
select “
ZONE COPY ?
”.
r
Push [
Ω
]
(for Handhelds)
or [P0]
(for Mobles)
to copy the se-
lected zone data to zone 128.
• “ COPIED ” s dsplayed.
NOTE:
When the transcever has not enough capacty to create
the tactcal group wth zone copy, all channel data may not
be coped completely.