w
Select the desred Indvdual ID (or name) usng
[CH Up]
/
[CH Down]
or
[CH Up/Down]
.
• The Indvdual ID can be edted wth the 10-keypad*. (Dependng
on the pre-settng.)
* 10-key types only.
To edit the Individual ID using the 10-keypad:
Input the Indvdual ID drectly wth the 10-keypad.
• Push
[
M
]
to clear a code.
For Handheld types: For Mobile types:
1 1 1
111
INDV TGID SET
INDV
e
Push and hold
[PTT]
to transmt the Indvdual call to the
target staton, then speak nto the mcrophone.
• The Busy/Transmt ndcator (for Handhelds) or Transmt ndca-
tor (for Mobles) lghts red.
• Dependng on the pre-settng, the target staton does not open
the squelch, and communcaton s not establshed, f the Ind-
vdual ID or NAC (Network Access Code) s not matched. Ask
your dealer for detals.
r
Release
[PTT]
to receve.
D
Receiving
q
When an Indvdual call s receved;
• The Busy/Transmt ndcator (for Handhelds) or Busy ndcator
(for Mobles) lghts green.
• The rnger sounds. (Dependng on the pre-settng.)
• The callng staton ID (or name) s dsplayed for 2 sec. (Depend-
ng on the pre-settng.)
• Dependng on the pre-settng, the transcever does not open the
squelch, and communcaton s not establshed, f the Indvdual
ID or NAC (Network Access Code) s not matched. Ask your
dealer for detals.
For Handheld types:
For Mobile types:
I N D I V I D U A L 1
INDIVIDUAL1
INDV TGID SET
The calling station name (or ID)
w
Push and hold
[PTT]
and speak nto the mcrophone.
e
Release
[PTT]
to receve a response.
For P25 Trunking mode operation:
When the Full Off Ar Call SetUp (FOACSU) functon s
turned ON, beeps sound after recevng a call. In that
case, push
[PTT]
to accept the call. Then, operate as de-
scrbed n steps
w
and
e
above. If you gnore the call by
not pushng
[PTT]
for a specfied tme perod*, commun-
caton s not establshed. Or, pushng
[Home]
after recev-
ng the call wll also gnore t.
* Dependng on the pre-settng. Ask your dealer for detals.
16
3
APCO P25 MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
