![background image](http://html1.mh-extra.com/html/icom/ic-f9020-series/ic-f9020-series_operating-manual_4296910020.webp)
17
3
APCO P25 MODE OPERATION
n
Talkgroup call
D
Transmitting
A Talkgroup call allows you to make a call to a specfic group
only.
[Talkgroup]
key assgnment s necessary to transmt the
Talkgroup call.
✔
For Trunking mode operation:
The
[Talkgroup]
key s not usable whle n the Trunkng mode.
To make a Talkgroup call, the group affilaton should be per-
formed wth the desred Talkgroup ID to call.
q
Push
[Talkgroup]
to enter the Talkgroup ID (or name) se-
lecton mode.
• “TGID” nverts to “
TGID
.” (on Handhelds)
• The key ndcator appears above the key to whch
[Talkgroup]
s
assgned. (on Mobles)
• A pre-programmed ID name s dsplayed.
• When the ID name s not programmed, the ID code s ds-
played.
• Push agan to cancel and return to normal operaton.
For Handheld types:
For Mobile types:
TG:1
INDV TGID SET
TGID
T G : 1
w
Select the desred Talkgroup ID (or name) usng
[CH Up]
/
[CH Down]
, or
[CH Up/Down]
.
NOTE:
When ‘65535’ s selected as the Talkgroup ID,
All Call s an open call to everyone on your system.
e
Push and hold
[PTT]
to transmt the Talkgroup call to the
specfic group, then speak nto the mcrophone.
• The Busy/Transmt ndcator
(for Handhelds) or Transmt ndca-
tor (for Mobles) lghts red.
• Dependng on the pre-settng, the target staton does not open
the squelch, and communcaton s not establshed, f the Talk-
group ID or NAC (Network Access Code) s not matched. Ask
your dealer for detals.
• The Talkgroup ID (or name) s dsplayed for 2 sec. when
[PTT]
s
pushed. (Dependng on the pre-settng.)
r
Release
[PTT]
to receve.