ADJUSTMENT
Adjustment No. Adjustment Condition & Tuning Value Ref. No. CK. Point
TX Output Use adjustment software to adjust the
adjustment output to the following values.
Adj.Soft
Adj. Freq. Greatest Low Band Freq. Power
Hi Power 25.0W
25.0W Hi ANT Con
L2 Power 10.0W 10.0W L2
L1 Power 2.5W 2.5W L1
TX Output Check Check that TX output is within the following
value in the range of frequency coverage.
Hi Power 20.0~30.0W 20-30W ANT Con
L2 Power 8.0~12.5W 8-12.5W
L1 Power 2.0~3.0W 2.0-3.0W
Current Check at Check that the Hi Power current is less than
TX the following value in the range of
frequency coverage.
Hi Power Less than 7.0A Less 7.0A
Checking Connect a spectrum analyzer to the ANT
Spurious terminal through an attenuator.
Set the attenuation so that the spectrum
Analyzer does not distort.
Set the transceiver to TX at Hi power,
check that spurious is less than the
following value in the range of frequency
coverage in the bandwidth.
Spurious Less than –70dB of the Less than ANT Con
carrier power -70 dB
