![background image](http://html1.mh-extra.com/html/icom/ic-f4160ds/ic-f4160ds_operating-manual_4263398027.webp)
24
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
dPMR OPERATION
24
■
Transmitting a command
The following Individual calls allow you to send special com-
mands. These calls will function if you are designated as a
specific station. Ask your dealer for details.
D
Transmitting an Ambience Listening Call
An Ambience Listening call allows you to send a command
that will require the target station to transmit its microphone
audio.
q
Push
[dPMR Button] to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push
[CH Up] or [CH Down] to select a desired Individual
ID.
e
Push
[dPMR Button] again to enter the application selec-
tion mode.
• “
STATUS” is displayed.
r
Push
[CH Up] or [CH Down] to select “LISTENING.”
t
Push
[Call] to transmit an Ambience Listening call to the
selected station.
• “
WAIT” is displayed while transmitting.
• “
OK” is displayed when an acknowledgement is received, then
the called station’s microphone audio can be heard for the pre-
programmed time period.
• “
FAILED” is displayed when no acknowledgment is received.
y
After a specified time period, the transceiver will return to
the stand-by mode.
D
Transmitting a Stun Call
A Stun call allows you to send a command that will stun the
target station.
q
Push
[dPMR Button] to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push
[CH Up] or [CH Down] to select a desired Individual
ID.
e
Push
[dPMR Button] again to enter the application selec-
tion mode.
• “
STATUS” is displayed.
r
Push
[CH Up] or [CH Down] to select “STUN.”
t
Push
[Call] to transmit a Stun call to the selected station.
• “
WAIT” is displayed while transmitting.
• “
OK” is displayed when an acknowledgement is received.
• “
FAILED” is displayed when no acknowledgment is received.
y
After a specified time period, the transceiver will return to
the stand-by mode.