![background image](http://html1.mh-extra.com/html/icom/ic-f4160ds/ic-f4160ds_operating-manual_4263398022.webp)
19
3
dPMR OPERATION
■
Transmitting a call (continued)
D
Transmitting a Voice Call
NOTE: If you want to make a call to the pre-programmed
ID, skip step
q
and
w
and directly go to step
e
.
q
Push
[dPMR Button] to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push
[CH Up] or [CH Down] to select a desired Individual
ID or Talkgroup ID.
e
Push
[Call] to make a Voice call.
• “
WAIT” appears while transmitting.
• “
CONNECT” is displayed when an acknowledgement is re-
ceived.
• “
FAILED” is displayed when no acknowledgment is received.
r
After “
CONNECT” is displayed, hold down [PTT] and speak
into the microphone at your normal voice level. Release
[PTT] to receive.
t
After the communication is finished, push
[Clear] to send a
‘Disconnect’ signal to terminate the connection.
• Either station can send a ‘Disconnect’ signal.
D
Transmitting a Status Polling Call
The transceiver can send a signal that causes the target sta-
tion to automatically transmit its current status.
q
Push
[dPMR Button] to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push
[CH Up] or [CH Down] to select a desired Individual
ID.
e
Push
[dPMR Button] again to enter the application selec-
tion mode.
• “
STATUS” is displayed.
r
Push
[CH Up] or [CH Down] to select “STAT POL.”
t
Push
[Call] to transmit the status polling call to the se-
lected station.
• “
WAIT” is displayed while transmitting.
• When a status message is received, the message and the sta
-
tion’s ID blink.
• “
FAILED” is displayed when no acknowledgment is received.
After a specified time period, the transceiver will return to the
stand-by mode.
y
Push
[Clear] to return to the stand-by mode.