![background image](http://html1.mh-extra.com/html/icom/ic-f4160ds/ic-f4160ds_operating-manual_4263398020.webp)
17
3
dPMR OPERATION
■
Receiving a call (continued)
D
Displaying a received call log entry
Depending on the pre-programmed setting, the transceiver
stores up to 10 call log entries. Individual Voice, Status and
SDM call log entries are stored. When an 11th call is re-
ceived, the oldest call log entry will be removed, and the last
received call will be added. When the transceiver is turned
OFF, all the log entries are deleted.
q
Push
[dPMR Button] twice to enter the application selec-
tion mode.
• “
STATUS” appears.
w
Push
[CH Up] or [CH Down] to select “CALL LOG.”
e
Push
[dPMR Button] again to display a call log entry.
r
Push
[CH Up] or [CH Down] to display a desired entry.
• If a Status or SDM call log entry is selected, not only the calling
station’s ID but also the status message or message are dis-
played.
t
Push
[dPMR Button] again to return to the stand-by
mode.
NOTE: Depending on the pre-programmed settings, push-
ing
[Call] while displaying a call log entry makes a Voice
call using the entry’s ID. However, if a Status or SDM call
log entry is selected, the transceiver makes a Voice call
using the last selected Individual or Talkgroup ID.
dPMR CALL TXCE CLR
VOICE
0000001
dPMR CALL TXCE CLR
NO LOG
When the transceiver
has a call log entry
When the transceiver
has no call log entries