background image

7

2

PANEL DESCRIPTION

ZONE KEY  

ZONE

Push ths key, then push [CH Up] or [CH Down] to select 
the desred zone. When [Rotary selector] selects “operatng 
zone,” ths key operaton s not avalable.

  

What is “zone”?

— Selected channels are assgned to a 

zone accordng to how they are to be used n a group. For 
example, ‘Staff A’ and ‘Staff B’ are assgned nto a “Bus-
ness” zone, and ‘John’ and ‘Cndy’ are assgned nto a 
“Prvate” zone.

ZONE UP AND DOWN KEYS 

 “

ZNUP

” “

ZNDN

Push to select an operatng zone. When [Rotary selector] 
selects “operatng zone,” ths key s not avalable.

SCAN A KEY

  “

SCNA

 Push to start and cancel scannng operaton.

  •  When Power ON Scan functon s actvated, push to pause the 

scannng operaton. And the paused scan resumes after the 
specfied tme perod has passed.

  Push and hold ths key for 1 sec. to ndcate the scan lst, 

then push [CH Up] or [CH Down] to select the desred lst.

SCAN B KEY

  “

SCNB

 Push to start and cancel scannng operaton.

   The  scan  restarts  after  the  specfed  tme  perod  has 

passed when the scan (started wth ths key) s canceled 
by except for ths key operaton.

  Push and hold ths key for 1 sec. to ndcate the scan lst, 

then push [CH Up] or [CH Down] to select the desred lst.

SCAN ADD/DEL (TAG) KEY  

SCAD

  Push to add or delete the selected channel to/from the 

scan group.

  1.  Push to ndcate the scan group, then push [CH Up] or 

[CH Down] to select the desred group.

  2.  Push to add or delete the channel to/from the selected 

scan group.

  3.  Push and hold for 1 sec. to ext the scan group selec-

ton mode.

  Push ths key whle scan s paused (a sgnal s detected) 

on a channel (except for prorty channel,) the channel s 
cleared from the scan group.

 

  Dependng on the settng, the cleared channel s 

added to the scan group agan after the scan s can-
celled. (Nusance Delete functon)

PRIORITY CHANNEL KEYS

  “

PRA

” “

PRAR

” “

PRB

” “

PRBR

  Push to select Prorty A or Prorty B channel.

  Push and hold [Pro A (Rewrte)] or [Pro B (Rewrte)] for 

1 sec. to rewrte the Prorty A or Prorty B channel for the 
operatng channel.

Summary of Contents for IC-F3162T





































Reviews: