26
7
SPEAKER MICROPHONE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Optional HM-169/170GP
description
Turn the transceiver power
OFF while connecting the
HM-169/170GP.
Speaker
Belt clip
Microphone
TOP KEY
(for HM-170GP only)
Desired functions can
be programmed by
your dealer.
GPS ANTENNA
(for HM-170GP only)
PTT SWITCH
Push and hold to
transmit;
release to receive.
This illustration is desicribed with HM-170GP.
NEVER
mmerse the connector n water. If the connector
becomes wet, be sure to dry t BEFORE attachng t to the
transcever.
NOTE:
The mcrophone s located at the top of the
speaker-mcrophone, as shown n the dagram above. To
maxmze the readablty of your transmtted sgnal (voce),
hold the mcrophone approx. 5 to 10 cm from your mouth,
and speak n a normal voce level.
■
To attach
Attach the connector of the speaker-mcrophone nto the
mult connector on the transcever and tghten the screw.
CAUTION: Attach the
multi connector snugly, but
do not overtighten.
A loose connection will al-
low water intrusion into the
connector; an overtight-
ened connector will dam-
age the connector pins in
the transceiver.
IMPORTANT:
KEEP
the connector cover attached to the
transcever when the speaker-mcrophone s not n use.
(p. 3)
Water wll not get nto the transcever even f the cover s
not attached, however, the termnals (pns) wll become
rusty, or the transcever wll functon abnormally f the
connector becomes wet.
