background image

18

3

BIIS OPERATION

n

 Receiving a message

ï

 

Receiving a status message

q

 When a status message is received;

  • Beeps sound.
  •  The calling station ID (or text) and the status message is dis-

played alternately when the indication mode is 1 line, depending 
on the setting.

R X

S t a t u s

0 1

B A S E

w

  Push [P4] (Moni(Audi)) to return to the standby condition.

 

 

NOTE: 

Only the calling station ID (or text) is displayed (no 

message is displayed alternately) when the scroll timer is 
set to ‘OFF.’ In this case, push [Status Up]/[Status Down] 
to display the status message manually.

ï

 Receiving an SDM 

(Short Data Message)

q

 When an SDM is received;

  • Beeps sound.
  •  The calling station ID (or text) and the SDM is displayed alter-

nately when the indication mode is 1 line, depending on the set-
ting.

  • “

 

 

” appears.

S D M

8

B A S E

Appears

w

  When the received SDM includes more than 12 characters, 

the message scrolls automatically, when the automatic 
scroll function is activated.

  • Push [Status Up]/[Status Down] to scroll the message manually.

S D M

1 2 3 4 5 6 7 8

B A S E

e

  Push [P4] (Moni(Audi)) to return to the standby condition.

Summary of Contents for IC-F1710





































Reviews: