![background image](http://html1.mh-extra.com/html/icom/ic-f1710/ic-f1710_instruction-manual_4221796018.webp)
14
3
BIIS OPERATION
n
Default setting
The following functions are assigned to each programmable
key as the default. However, the assigned function can be
changed by your dealer. Ask your dealer for details.
NOTE:
[TX Code Enter] must be assigned to a key.
P0
P4
P3
P2
P1
In this instruction
manual, these keys
are from the left,
called [P0]/[P1]/
[P2]/[P3]/[P4].
[P0]; Call
: Push to transmit a 5-tone/BIIS call
when the selected channel is a 5-
tone or BIIS channel.
[P1]; Digital
: Push to select the call list ID/transmit
message, or to display the receive
message record for selection.
[P3]; TX Code Enter : Push to enter the ID code edit mode
directly for both 5-tone and BIIS.
[P4]; Moni(Audi)
: Push this key after the communication
to send a ‘Clear down’ signal during
BIIS channel operation.
[P2]; Null
: No function is assigned.
[Up]/[Down]/[DIAL]; CH Up/Down
: While in the standby condition, se-
lects the operating channel.
After pushing [Digital] or [TX Code CH
Select], selects call list or TX code
channel, respectively.
n
Receiving a call
ï
Individual call
q
When an individual call is received;
• Beeps sound.
• “
” appears and the mute is released.
• The programmed text message (e.g.“
CALLING
”) and the call-
ing station ID (or text) is displayed when the indication mode is 2
lines.
• The programmed text message (e.g.“
CALLING
”) and the calling
station ID (or text) is displayed alternately when the indication
mode is 1 line, depending on the setting.
• “
” appears or blinks depending on the setting.
Appears or blinks
Appears
C A L L I N G
0 5 0 0
w
Push and hold [PTT], then speak into the microphone at a
normal voice level.
• TX indicator lights red.
e
Release [PTT] to return to receive.
• BUSY indicator lights green while receiving a signal.
r
To finish the conversation, push [P4] (Moni(Audi)) to send
the ‘Clear down’ signal.
• Either station can send a ‘Clear down’ signal.
• “
CLR DOWN
” is displayed for 2 sec. (approx.).
• “
” disappears and the transceiver returns to the standby con-
dition.