![background image](http://html1.mh-extra.com/html/icom/ic-e90/ic-e90_instruction-manual_4188843023.webp)
18
4
BASIC OPERATION
■
Tuning step
When using the tuning dial to change
the frequency, or when a scan function
is activated, the frequency changes in
increments determined by the set tun-
ing step. Tuning steps can be selected
for each band. This transceiver has 13
tuning steps as follows:
• 5 kHz
• 6.25 kHz • 8.33* kHz
• 9* kHz
• 10 kHz
• 12.5 kHz
• 15 kHz
• 20 kHz
• 25 kHz
• 30 kHz
• 50 kHz
• 100 kHz
• 200 kHz
*Depends on version.
D
Setting the tuning step
q
Push [9 TS] for 1 sec. to enter tuning
step set mode.
• “TS” appears.
w
Rotate [DIAL] to select the desired
tuning step.
• Rotating the tuning dial while pushing [9
TS] also selects the tuning step.
• Tuning step can be set in VFO and
memory modes.
e
Push [9 TS] or [VFO] to exit.
D
MHz tuning step
This is useful to change the frequency
rapidly.
q
Select VFO mode with [VFO].
w
Push [VFO MHz] for 1 sec. to select
1 MHz tuning step.
e
Push [VFO MHz] for 1 sec. again to
select 10 MHz tuning step, if re-
quired.
r
Rotate [DIAL] to select the desired
MHz frequency.
t
Push [VFO] to exit MHz tuning step.
FM
SKIP
P
FM
SKIP
P
1 MHz tuning step
10 MHz tuning step
5 kHz tuning step
20 kHz tuning step
[9 TS]
[DIAL]
[VFO MHz]
r
r
BASIC OPERA
TION