background image

45

6

SCAN OPERATION

Scan types

Up to 25 programmed scan ranges (0A/0B to 24A/24B), full
scan, band scan and memory bank scan provide scanning
versatility. Each scan can have skip channels programmed.

D

VFO scans

FULL SCAN

(p. 46)

Repeatedly scans all fre-
quencies over the entire re-
ceive range.
• Some frequency ranges are

restricted depending on
versions.

BAND SCAN

(p. 46)

Repeatedly scans all fre-
quencies over the entire se-
lected band.

PROGRAMMED SCAN

(p. 46)

Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
for frequencies within a
specified range such as re-
peater output frequencies,
etc.

D

Memory scans

FULL MEMORY SCAN

(p. 48)

Repeatedly scans all mem-
ory channels except skip
channels.

SELECT BAND SCAN

(p. 48)

Repeatedly scans memory
channels except skip chan-
nels within a selected mem-
ory band. (e.g. WFM, 144M
or 440M memory band, etc.)

BANK SCAN

(p. 48)

Repeatedly scans memory
channels except skip chan-
nels within specified memory
bank (i.e. memory Bank,
A00–A99).

CH-A00

CH-A01

CH-A03

CH-A04

CH-A12

CH-A13

CH-A35

CH-A99

SKIP

77.500

78.500

80.200

81.250

85.100

90.150

96.500

101.200

SKIP

(Unit: MHz)

CH-000

CH-001

CH-002

CH-003

CH-004

CH-005

CH-006

CH-499

SKIP

Jump

Lower

scan edge

(0A–24A)

Upper

scan edge

(0B–24B)

Scan

Jump

Lower

band edge

Upper

band edge

Scan

Jump

Start

Lower

edge

Upper

edge

Scan

Jump

P SKIP

P SKIP

Summary of Contents for IC-E90





































































































Reviews: