![background image](http://html1.mh-extra.com/html/icom/ic-e90/ic-e90_instruction-manual_4188843082.webp)
77
9
OTHER FUNCTIONS
■
Cloning function
The IC-E90 has transceiver-to-transceiver data cloning capa-
bility. This function is useful when you want to copy all of the
programmed contents from one IC-E90 to another.
• An optional OPC-474
CLONING CABLE
is required.
q
Connect an optional OPC-474 between both [SP] jacks.
w
While pushing [8 SET] and [MR], push [PWR] for 1 sec. to
enter cloning mode.
• “CLONE” appears.
e
Push [PTT] on the “master” transceiver.
• “CL OUT” appears and the signal indicator shows that cloning is
taking place.
r
Push [PWR] for 1 sec. to turn power OFF.
The optional CS-T90A
CLONING SOFTWARE
and the optional
OPC-478
CLONING CABLE
are available to clone and edit
contents with a PC (for Microsoft
®
Windows
®
95/98 and ME).
Microsoft
®
and Windows
®
are registered trademarks of Microsoft Corporation in
the U.S.A. and other countries.
■
[SP/MIC] jacks
To connect external equipment such as speaker, microphone,
TNC, etc. refer to the diagram below.
The center terminal of [MIC] outputs 3.2 V DC via 330
Ω
register.
External
speaker
[SP] jack
SP
SP
GND
ø3.5 mm
plug
[MIC] jack
33 k
Ω
MIC
MIC
GND
External
microphone
ø2.5 mm
plug
PTT
3.2 V (See below)
Impedance 8
Ω
Impedance 2 k
Ω
MIC
3.2V
MIC GND
SP (AF OUT)
REMOTE
SP GND
OPC-474
to
[SP]
to
[SP]
Signal indicator shows that
cloning is taking place.
Cloning period
Cloning mode