![background image](http://html1.mh-extra.com/html/icom/ic-e90/ic-e90_instruction-manual_4188843058.webp)
53
7
PRIORITY WATCH
D
VFO scan with memory scan watch
While scanning in VFO mode, priority watch checks for sig-
nals in memory channels every 5 sec.
q
Select memory mode.
w
Push [MODE SCAN] for 1 sec. to start a memory scan.
• Start the memory scan first, otherwise, memory scan watch does
not start.
e
Push [8 SET] for 1 sec. to enter set mode.
r
Rotate [DIAL] until “PRIO” appears.
t
Push [8 SET] to select the priority watch item.
y
Rotate [DIAL] to select the priority watch (“ON”) or priority
watch with alert (“BELL”).
u
Push [VFO] to exit set mode and start the memory scan
watch.
i
Push [MODE SCAN] for 1 sec. to start a VFO scan. (full
scan, band scan or programmed scan)
• VFO scan with memory scan watch is now activated.
• The scan or watch pauses when a signal is received on a VFO
frequency or watching memory channels.
o
Push [VFO] while the display shows the VFO frequency to
stop the VFO scan and priority watch.
D
Call channel watch
While operating on a VFO frequency, priority watch checks
for a signal in the selected call channel every 5 sec.
q
Select VFO mode; then, set an operating frequency.
w
Push [CALL/TV] to select call channel mode.
e
Rotate [DIAL] to select the desired call channel.
r
Push [8 SET] for 1 sec. to enter set mode.
t
Rotate [DIAL] until “PRIO” appears.
y
Push [8 SET] to select the priority watch item.
u
Rotate [DIAL] to select the priority watch (“ON”) or priority
watch with alert (“BELL”).
i
Push [VFO] to exit set mode and start the priority watch.
o
Push [VFO] while the display shows the VFO frequency to
stop the watch.
FM
PRIO
SKIP
P
FM
PRIO
Checks for a signal in the selected
call channel every 5 sec.
While operating on a VFO
frequency
The watch stops on the selected
channel when a signal is received.