![background image](http://html.mh-extra.com/html/icom/ic-e208/ic-e208_instruction-manual_612424058.webp)
43
7
SCAN OPERATION
■
Skip channel setting
[
The memory skip function speeds up scanning by checking
only those memory channels not set as skip channels. Set
skip channels as follows.
q
Select a memory channel:
➥
Push [M/CALL•PRIO] to select memory mode.
➥
Rotate [DIAL] to select the desired channel to be a skip
channel.
w
Push [SET•LOCK] to enter set mode.
e
Push [SET•LOCK] or [S.MW•MW] several times until
“CHS” appears as shown above.
r
Rotate [DIAL] to turn the skip function ON or OFF for the
selected channel.
• “
~
” appears
: The channel is skipped during scan.
(CHS-ON)
• “P
~
” appears : The channel is skipped during scan and the
programmed frequency is skipped during VFO scan, such as
programmed scan.
(CHS-ON)
• “
~
” disappears : The channel is scanned during scan.
(CHS-OF)
t
Push [MONI•DTMF] to exit set mode.
z
Select a memory channel.
➥
Select memory mode by pushing [MR/CALL].
➥
Push [
Y
] or [
Z
] to select the desired channel
to be a skip channel.
• Direct memory channel selection is also available.
x
Push [
SET
B(D-OFF)] to enter set mode.
c
Push [
SET
B(D-OFF)] or [
ENT
C(T-OFF)] several
times until “CHS” appears as shown at left.
v
Push [
Y
] or [
Z
] to set or cancel the skip setting.
• See item
r
at left for skip indicator details.
b
Push [
CLR
A(MW)] to exit set mode.
SET
B
The display shows that mem-
ory channel 1 is set as a skip
channel.