4
1
PANEL DESCRIPTION
1
r
NARROW MODE INDICATOR
(p. 63)
Appears when the FM/AM narrow mode is selected.
t
AM INDICATOR
(p. 63)
Appears when AM mode is selected.
y
SQUELCH ATTENUATOR INDICATOR
(p. 16)
Appears when the squelch attenuator function is activated.
• The attenuator can be switched OFF in initial set mode. (p. 62)
u
AUTO POWER-OFF INDICATOR
(p. 61)
Appears while the auto power OFF function is in use.
i
AUDIO MUTE INDICATOR
(P. 18)
Appears when the audio mute function is activated.
• The mute can only be switched ON and OFF from the HM-133
only.
o
FREQUENCY READOUT
Shows the operating frequency, channel names, set mode
contents, etc.
• Frequency decimal point blinks while scanning. (p. 40)
• “d” appears in place of the 1st digit while the DTMF memory
function is in use. (p. 47)
!0
PRIORITY INDICATOR
(p. 46)
Appears while the priority watch is activated; blinks while
the watch is paused.
!1
MEMORY CHANNEL NUMBER INDICATORS
➥
Shows the selected memory channel number. (p. 25)
➥
Shows the selected bank initial. (p. 34)
➥
“C” appears when the call channel is selected. (p. 37)
➥
“L” appears when the lock function is activated. (p. 14)
!2
SKIP INDICATORS
➥
“
~
”appears when the displayed memory channel is
specified as a skip channel. (p. 43)
➥
“P
~
” appears when the displayed frequency is spec-
ified as a program skip frequency. (p. 43)
!3
MEMORY INDICATOR
(pgs. 11, 25)
Appears when memory mode is selected.
!4
S/RF INDICATORS
➥
Shows the relative signal strength while receiving sig-
nals. (p. 15)
➥
Shows the output power level while transmitting. (p. 17)
!5
OUTPUT POWER INDICATORS
“LOW” appears when low output power; “MID” appears
when middle output power is selected.
No indicator appears when high output power is selected.
!6
BUSY INDICATOR
➥
Appears when a signal is being received or the squelch
is open. (p. 15)
➥
Blinks while the monitor function is activated. (p. 15)