![background image](http://html.mh-extra.com/html/icom/ic-e208/ic-e208_instruction-manual_612424053.webp)
38
6
CALL CHANNEL OPERATION
6
■
Programming a call channel
Operating frequency, duplex information, subaudible tone in-
formation (tone encoder or tone squelch ON/OFF and its fre-
quency) can be programmed into the call channel.
q
Set the desired frequency in VFO mode.
➥
Push [V/MHz•SCAN] to select VFO mode.
➥
Set the frequency using [DIAL].
➥
Set other data as desired.
w
Push [S.MW•MW] momentarily.
e
Rotate [DIAL] to select the desired call channel.
• “
!
” indicator and “C1” or “C2” blink.
r
Push [S.MW•MW] for 1 sec. to program.
• 3 beeps sound and the unit returns to VFO mode automatically.
z
Set the desired frequency in VFO mode.
➥
Push [VFO/LOCK] to select VFO mode.
➥
Set the frequency.
➥
Set other data as desired.
x
Push [FUNC], then [
CLR
A(MW)] momentar-
ily.
c
Select the call channel via [
Y
] or [
Z
].
v
Push [FUNC] then [
CLR
A(MW)] for 1 sec. to
program.
• 3 beeps sound and the unit returns to VFO mode
automatically.
MR/CALL
MW
[
Y
]/[
Z
]
[EXAMPLE]:
Programming 145.120 MHz into the call channel 2 via the microphone.
Set the frequency.
Push to select VFO mode.
Push , then .
Push , then push for 1 sec.
➠
Push until “C2” appears.
Beep
Beep
Beep
“
“
“
“
“