![background image](http://html.mh-extra.com/html/icom/ic-e208/ic-e208_instruction-manual_612424082.webp)
67
11
OTHER FUNCTIONS
D
Cloning using a personal computer
Data can be cloned to and from a personal computer (Mi-
crosoft
®
Windows
®
98/2000/Me/XP) using the optional CS-208
CLONING SOFTWARE
and the optional cloning cable OPC-478U
(USB type) or OPC-478 (RS-232C type). Consult the CS-208
CLONING SOFTWARE
HELP file for details.
D
Cloning error
☞
NOTE: DO NOT
push any key on the sub-transceiver dur-
ing cloning. This will cause a cloning error.
When the display as below appears, a cloning error has oc-
curred.
In such a case, both transceivers automatically return to the
clone standby condition and cloning must be repeated.
■
Packet operation
D
Data speed
For packet operation, the transceiver can be set to one of two
data speeds: 1200 bps or 9600 bps.
q
While pushing [SET•LOCK], push [PWR] for 1 sec. to enter
initial set mode.
w
Push [SET•LOCK] or [S.MW•MW] to select the ‘BPS’ item.
e
Rotate [DIAL] to select the desired data speed.
r
Push [PWR] to exit initial set mode.
For 1200 bps operation—
• Disconnect the microphone plug from the microphone
connector during data transmission, otherwise the data
signal and voice signal are simultaneously transmitted.
For 9600 bps operation—
• When the transceiver is set for 9600 bps data transmis-
sion in set mode, the microphone signal is automatically
cut. Therefore, it is not necessary to disconnect the mi-
crophone plug from the connector in this case.
• When pushing [PTT] during data transmission, data trans-
mission is interrupted and voice signals have priority.