Icom IC-92AD Instruction Manual Download Page 81

Page: 81 / 156

New2001

MEMORY/CALL CHANNELS

Using the KEYPAD

Push

[MR]

to select memory mode.

Use the keypad to enter 3 digits to select the desired

memory channel.

• The blank channels are also selectable.

• Example— selecting memory channel “25”

Push

[MR]

then push

[0]

[2]

[5]

■

Selecting a call channel

Push

[CALL]

to select call channel mode.

• Pushing

[CALL]

toggles call, TV* and weather

†

channels.

Rotate

[DIAL]

to select the desired call channel.

• “C0” and “C1” are selectable.

* Appears only when TV channels are programmed via the

optional RS-92. Also available for A band operation only.

†

Available for the U.S.A. version only.

Appears

145 600

600

025

The entered memory
channel is selected.

S.MW

Keypad

440 000

000

146 010

010

VHF band call channel

UHF band call channel

[DIAL]

CALL

Summary of Contents for IC-92AD





























































































































































Search results

Summary of Contents for IC-92AD

Reviews:

Brands by name

Popular brands

Icom IC-92AD, Instruction Manual

Search results

Summary of Contents for IC-92AD

Reviews:

Brands by name

Popular brands