manualshive.com logo in svg

Icom IC-92AD, Instruction Manual

Share
Download
Icom IC-92AD Instruction Manual Download Page 140

132

13

OTHER FUNCTIONS

New2001

■

 Cloning function

The IC-92AD has transceiver-to-transceiver data cloning 
capability. This function is useful when you want to copy all 
of the programmed contents from one IC-92AD to another. 
•  An optional OPC-474 

CLONING

 

CABLE

 and OPC-1797 

CON

-

NECTION

 

CABLE

 are required.

q

  Turn the transceiver’s power OFF, then connect an op-

tional OPC-474 and OPC-1797 between both 

[SP]

 jacks.

w

  While pushing 

[MR]

 and 

[MENU/

]

, push and hold 

[PWR

] for 1 sec. to enter cloning mode.

 

• “CLONE M” appears.

e

 Push 

[PTT]

 on the “master” transceiver.

 • 

 

“CLONE OUT M” appears and the bar meter shows that cloning 
is taking place.

 • 

 

After the cloning is completed, the display returns to “CLONE 
END.”

r

 Push and hold 

[PWR]

 for 1 sec. to turn power OFF.

The optional RS-92 

REMOTE CONTROL SOFTWARE

 is also 

available to clone/edit contents with a PC (for Microsoft

®

 

Windows

®

 98/98SE/ME/2000/XP/Vista) and using ICF for-

mat fi les.

OPC-474 (optional)

OPC-1797 (optional)

to [DATA/SP/MIC]

to [SP]

to [SP]

New

Summary of Contents for IC-92AD





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands