![background image](http://html.mh-extra.com/html/icom/ic-92ad/ic-92ad_instruction-manual_612378005.webp)
New2001
iv
NOTICES
D
Using the optional HM-175GPS
Noise signals from the HM-175GPS may interfere with the
IC-92AD's AM radio or HF band reception.
In this case, set the HM-175GPS’s microphone cable as
distant to the antenna as far as possible, or turn off the HM-
175GPS.
D
Data output from HM-175GPS
The optional HM-175GPS outputs GPS data (position data,
etc.) to IC-92AD at intervals while receiving only.
Therefore, the transceiver is not updated GPS data while
transmitting.
The transceiver transmits GPS data that was received prior
to the last IC-92AD DV mode transmit.
D
About OPC-1797
• NEVER connect the optional OPC-1797
CONNECTION
CABLE
with non-Icom article specifi ed.
• When connecting a monaural plug to 2.5 (d) mm, it acts as
short and becomes a cause of failure.
• Turn power OFF when connecting or disconnecting the
OPC-1797.
Icom, Icom Inc. and the logo are registered trademarks of Icom
Incorporated (Japan) in the United States, the United Kingdom,
Germany, France, Spain, Russia and/or other countries.
APRS
®
is a registered trademark of Mr. Bob Bruninga in the U.S.A.
and other countries.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Microsoft, Windows and Windows Vista are either registered trade-
marks or trademarks of Microsoft Corporation in the United States
and/or other countries.