manualshive.com logo in svg

Icom IC-92AD, Instruction Manual

Share
Download
Icom IC-92AD Instruction Manual Download Page 40

New

32

6

REPEATER AND DUPLEX OPERATIONS

New2001

■

 Auto repeater function

The U.S.A. version automatically use standard repeater set-
tings 

(duplex ON/OFF, duplex direction, tone encoder ON/OFF)

 

when the operating frequency falls within or outside of the 
general repeater output frequency range. The offset and 
repeater tone frequencies are not changed by the auto re-
peater function. Reset these frequencies, if necessary.

D

 Frequency range and offset direction

• U.S.A. version

q

  Enter “AUTO RPT” in set mode. (p. 97)

w

 Rotate 

[DIAL]

†

 to select the auto repeater setting.

 

  • “RPT1” : Activates duplex only. (default)

 

  • “RPT2” : Activates duplex and tone.

 

  • “OFF”  : Auto repeater function is turned OFF.

e

  Push 

[

](5)

 

(or 

[ ](4)

)

 to return to set mode, and push 

[MENU/

]

 to return to frequency indication.

FREQUENCY RANGE

SHIFT DIRECTION

147.000–147.395 MHz

“+DUP” appears

442.000–444.995 MHz

“+DUP” appears

447.000–449.995 MHz

“–DUP” appears

145.200–145.495 MHz
146.610–146.995 MHz

“–DUP” appears

      ❮

MENU screen

❯

   

➪

   

❮

SET MODE

❯

   

➪

   

❮

AUTO RPT

❯

 (Push 

[MENU/

]

) (Rotate 

[DIAL]

†

, then push 

[

](5)

‡

.)

U.S.A. version only

Summary of Contents for IC-92AD





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands