41
7
DV MODE OPERATION
New2001
7
■
Digital repeater operation
Repeater call signs must be programmed for repeater op-
eration in both digital voice and low-speed data communica-
tions.
D
Repeater call sign programming
q
Select B band as the main band.
(p. 14)
w
Enter “R1” or “R2” in call sign set mode.
• RPT1 or RPT2 CALL SIGN screen is displayed.
• Pushing and holding
[CS](9)
for 1 sec. is also available to enter
call sign set mode.
e
Rotate
[DIAL]
†
to select the desired call sign memory,
“R01” to “R60.”
r
Push
[ ](6)
to enter call sign programming mode.
• The 1st digit blinks.
t
Rotate
[DIAL]
†
to select the desired character or code.
•
Push
[A/a](3)
to change the character group from “AB” (alpha-
betical characters; capital letters), “12” (numbers) and “/” (sym-
bols) in sequence.
•
Set “/” at the 1st digit then set the desired area repeater’s call
sign (in a different zone) for CQ call (“/” stands for “CQCQCQ”)
in a different zone operation. (p. 44)
y
Push
[ ](6)
to select 2nd digit, then rotate
[DIAL]
†
to se-
lect the desired character or code.
•
Push
[ ](6)
to move the cursor right; push
[ ](4)
to move the
cursor left.
• 2nd digit blinks (1st digit stops blinking).
u
Repeat the steps
t
and
y
to enter the desired repeater
call sign.
• Up to an 8-digit of call sign can be set.
•
Push
[7]
when setting with the gateway connection if the
selected repeater has gateway capability. (The gateway con-
nection can be set in RPT1 only when “NOT USE
✱
” is set to
RPT2.)
•
If an un-necessar y character is entered, push
[
](6)
or
[ ](4)
to select the character, then push
[CLR](1)
to erase the
selected character, or push and hold
[CLR](1)
for 1 sec. to all
characters following the cursor.
i
Push
[
](5)
to store the programmed call sign and re-
turns to RPT1 or RPT2 CALL SIGN screen.
o
Push
[MENU/
]
to return to frequency indication.
†
[DIAL]
↔
[ ](2)
/
[ ](8)
‡
[
](5)
↔
[ ](6)
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
❮
MENU screen
❯
➪
❮
CALL SIGN
❯
➪
❮
R1
❯
/
❮
R2
❯
(Push
[MENU/
]
) (Rotate
[DIAL]
†
, then push
[
ï
](5)
‡
.)
R01
R01
RPT1AA G
RPT1AA G
:SET
:SET
:BACK
:BACK
:SEL
:SEL
:EDIT
:EDIT
CLR:CLR
CLR:CLR
RPT1 CALL SIGN
RPT1 CALL SIGN
r
