manualshive.com logo in svg

Icom IC-92AD, Instruction Manual

Share
Download
Icom IC-92AD Instruction Manual Download Page 13

5

2

PANEL DESCRIPTION

New2001

2

KEY

Pushed momentarily

Pushed and held for 1 sec.

•  Inputs digit ‘7’ for frequency input, memory channel selection, 

etc.

• While pushing [PTT], this key sends the DTMF code “7.”

•  During FM/FM-N mode operation, selects repeater tone, tone 

squelch, tone squelch reverse, DTCS squelch, DTCS squelch re-
verse and no tone operation in sequence. (p. 124)

•  During DV mode operation, selects digital call sign squelch, digital 

code squelch and no squelch operation in sequence. (p. 124)

•  Inputs digit ‘8’ for frequency input, memory channel selection, 

etc.

• While pushing [PTT], this key sends the DTMF code “8.”

• Selects tuning step selection. (p. 18)

•  Inputs digit ‘9’ for frequency input, memory channel selection, 

etc.

• While pushing [PTT], this key sends the DTMF code “9.”

• Select DTMF memory mode. (p. 117)
  (Push and hold for 2 sec. while operating DV mode.)
•  During DV mode operation, CALL SIGN setting mode is displayed. 

(pgs. 38, 48)

•  Inputs digit ‘0’ for frequency input, memory channel selection, 

etc.

• While pushing [PTT], this key sends the DTMF code “0.”

•  During DV mode operation, set “CQCQCQ” for station’s call sign 

for operation.

• Inputs MHz digit for frequency input.
• While pushing [PTT], this key sends the DTMF code “F (#).”

•  During FM/FM-N mode operation, starts tone scan function. 

(p. 126)

•  During DV mode operation, RX CALL SIGN is displayed. (p. 46)

•  During DV mode operation, selects the record track for voice 

memory. (p. 66)

• While pushing [PTT], this key sends the DTMF code “E (

✱

).”

• Selects the operating mode. (p. 21)

9

DTMF.M

CS

0

CQ

.

T.SCAN

CD

#

REC

MODE

7

TONE

DSQ

8

TS

Summary of Contents for IC-92AD





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands