![background image](http://html.mh-extra.com/html/icom/ic-80ad/ic-80ad_instruction-manual_612358161.webp)
153
13
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
[DIAL]
Tone scan for repeater tone
Tone scan for tone squelch
Tone scan for DTCS squelch
t
Push
[V/MHz]
to stop the scan.
•
If the scan is cancelled before the transceiver detects the tone
or code, the set mode contents are not changed.
•
The detected tone is used for temporary operation only. The
stored tone setting in memory or call channel won’t be changed.
NOTE:
Tone frequency is over-written automatically when it cor-
responds with the scanning tone frequency in tone squelch mode.
However, it is not over-written in memory or call channel mode.
N
Beep tones
You can select to have confirmation beeps sound at the
push of a switch. The output level can be adjusted within 39
levels with “BEEPLV” in SOUNDS set mode (SET).
MENU
¶
SOUNDS
¶
BEEPLV
(p. 130)
(Push
[MENU
]
), (Push
[
]
(2)/
[
]
(8), then push
[
]
(5).)
You can select silent operation by turning beep tones OFF
with “KEY B” in SOUNDS set mode (SET).
MENU
¶
SOUNDS
¶
KEY B
(p. 130)
(Push
[MENU
]
), (Push
[
]
(2)/
[
]
(8), then push
[
]
(5).)
N
Dial speed acceleration
The dial speed acceleration automatically speeds up the
tuning dial speed when rotating
[DIAL]
rapidly.
This function can be turned ON and OFF with “DIAL S”
(DIAL SPEED) in FUNC set mode (SET).
MENU
¶
SET
¶
FUNC
¶
DIAL S
(p. 127)
(Push
[MENU
]
), (Push
[
]
(2)/
[
]
(8), then push
[
]
(5).)
Summary of Contents for IC-80AD
