Icom IC-80AD, Instruction Manual, Page: 72 / 188

D
Calling CQ in the same zone (Zone CQ)
q
Set the desired repeater’s frequency, offset and shift direc-
tion (pgs. 23, 31), then select the DV mode (p. 25).
Your own call sign (step
w
) and station call sign (step
e
)
can also be set as same as repeater call signs in current
call sign mode (step
r
).
w
Set the current call sign to your own call sign.
• See pgs. 47, 48 for current call sign setting details.
e
Set the current station call sign as follows:
±
Push and hold [UR] (.) for 1 sec. to enter UR call sign
selection mode.
• Push [BAND] several times to select “GRP CQ,” then “CQC-
QCQ” is selected automatically. Push [UR] (.) again.
r
Set the current repeater’s call sign as follows:
z
Push and hold [CS] (9) for 1 sec. to enter the current call
sign mode.
• UR call sign is displayed.
• Push and hold [CS] (9) for 1 sec. to toggle the call sign and
repeater name indications.
x
Push [ ] (2) or [ ] (8) to select “R1,” access repeater’s
call sign, then push [ ] (5) to enter the current call sign
selection mode.
c
Push [ ] (2) or [ ] (8) to select the desired access re-
peater’s call sign, then push [ ] (5) to set the call sign
for “RPT1.”
• Return to the current call sign mode.
v
Push [ ] (2) or [ ] (8) to select “R2,” link repeater’s call sign,
then push [ ] (5) to set the current call sign selection mode.
• “RPT2” call sign screen is displayed.
b
Push [ ] (2) or [ ] (8) to select the desired repeater call
sign in the same zone, then push [ ] (5).
• Return to the current call sign mode.
n
Push [V/MHz] to return to frequency indication.
t
Push [PTT] to transmit; release to receive.
• “CQCQCQ” is displayed and scrolled in sequence on the fre-
quency display depending on “TX CS” setting (p. 135).
• Current call sign setting example
My call sign ：
JA3YUA
Repeater
q
：
JP3YHL
Repeater
r
： JP3YHJ
CQ
q w e r
UR MY
R1 R2
Area
Zone
64
7
DV MODE OPERATION
Pushing [BAND] selects the repeater group when selection.