![background image](http://html.mh-extra.com/html/icom/ic-80ad/ic-80ad_instruction-manual_612358038.webp)
30
5
REPEATER AND DUPLEX OPERATIONS
D
Checking the repeater input signal
The transceiver can check whether the other station’s trans-
mit signal can be received directly or not, by listening on the
repeater input frequency.
±
Push and hold
[SQL]
to check whether the other station’s
transmit signal can be received directly or not.
•
When the other station’s signal can be directly received, move
to a non-repeater frequency to use simplex. (duplex OFF)
Indication while receiving
Receives –0.6 MHz shift frequency
Blinks while pushing and holding
[SQL]
Push and hold
D
Off band indication
If the transmit frequency is out of the amateur band, the off
band indication, “OFF,” appears on the display when
[PTT]
is
pushed. Check the offset frequency or duplex direction in this
case.
(p. 31)
U.S.A. and Korean versions:
Auto repeater function uses standard values of the offset
frequency.
CONVENIENT!
Tone scan function:
When you don’t know the subaudible
tone used for a repeater, the tone scan is convenient for de-
tecting the tone frequency.
±
Push and hold
[T.SCAN]
(9) for 1 sec. to start the tone
scan. See p. 152 for more information.
Summary of Contents for IC-80AD
