![background image](http://html.mh-extra.com/html/icom/ic-80ad/ic-80ad_instruction-manual_612358030.webp)
22
4
BASIC OPERATION
N
Setting a tuning step
The tuning step can be selected for each frequency band.
The following tuning steps are available for the IC-80AD.
• 5.0 kHz* • 6.25 kHz* • 8.33 kHz
†
• 9.0 kHz
‡
• 10.0 kHz
• 12.5 kHz • 15.0 kHz* • 20.0 kHz • 25.0 kHz • 30.0 kHz
• 50.0 kHz • 100.0 kHz • 125.0 kHz • 200.0 kHz
* Appears for bands below the 600 MHz only.
†
Appears for the VHF air band only.
‡
Appears for the AM broadcast band only.
D
Tuning step selection
q
Push
[V/MHz]
to select VFO mode, if necessary.
w
Push
[BAND]
to select the desired frequency band.
e
Push and hold
[TS]
(2) for 1 sec. to enter tuning step set mode.
• While pushing and holding
[TS]
(2), rotating
[DIAL]
is also se-
lectable tuning step.
r
Rotate
[DIAL]
to select the desired tuning step.
t
Push
[TS]
(2) (or
[V/MHz]
) to return to VFO mode.
[DIAL]
5 kHz tuning step
N
Setting a frequency
D
Using the dial
q
Push
[V/MHz]
to select VFO mode, if necessary.
w
Select the desired frequency band with
[BAND]
.
e
Rotate
[DIAL]
to select the desired frequency.
• The frequency changes according to the preset tuning
steps. See the previous content to set the tuning step.
• When VFO mode is selected, push
[V/MHz]
then rotate
[DIAL]
to change the frequency in 1 MHz steps, or push
[V/MHz]
again then rotate
[DIAL]
to change the frequency
in 10 MHz steps. Push
[V/MHz]
again to cancel it.)
[DIAL]
[DIAL] changes the frequency
according to the selected tuning
step.
After pushing [V/MHz] on VFO
mode, [DIAL] changes the
frequency in 1 MHz/10 MHz steps.
Summary of Contents for IC-80AD
