![background image](http://html.mh-extra.com/html/icom/ic-7800/ic-7800_service-manual_612345005.webp)
1 - 1
M
GENERAL
• Frequency coverage:
Receive 0.030–60.000
MHz*1, *2
Transmit 0.1357–0.1378
MHz*2 1.800–1.999 MHz*2
3.500–3.999
MHz*2
5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz*2
7.000–7.300
MHz*2 10.100–10.150
MHz*2
14.000–14.350
MHz*2 18.068–18.168 MHz*2
21.000–21.450
MHz*2 24.890–24.990 MHz*2
28.000–29.700
MHz*2 50.000–54.000 MHz*2
*1 Some frequency bands are not guaranteed.
*2 Depending on version.
• Mode
: USB, LSB, CW, RTTY, AM, FM,
PSK31
• Number of memory channels
: 101 (99 regular, 2 scan edges)
• Antenna connector : SO-239 × 4 [antenna impedance; 50
Ω
]
• Usable temp. range : 0˚C to +50˚C (32˚F to 122˚F)
• Frequency stability : Less than ±0.05 ppm
(IC-7800’s condition: After 5 min. since
turns power ON on the rear panel)
• Freq. resolution
: 1 Hz
• Power supply
: 85–265 V AC
(universal input)
voltage
• Power consumption :
Transmit
at 200 W
800 VA
Receive
stand-by
200 VA (typical)
max. audio
210 VA (typical)
• Dimensions
: 424 (W) × 149(H) × 435(D) mm
(Proj. not included) 16
11
⁄
16
(W) × 5
7
⁄
8
(H) × 17
1
⁄
8
(D) in
• Weight
: Approximate 25 kg (55 lb)
• ACC 1 connector : 8-pin DIN connector
• ACC 2 connector : 7-pin DIN connector
• CI-V connector
: 2-conductor 3.5(d) mm (
1
⁄
8
")
• Display
: 7-inch diagonal wide TFT color LCD
(800 × 480)
M
TRANSMITTER
• Output power
:
HF: SSB/CW/RTTY/FM/PSK31
5–200 W
AM
5–50
W
137 kHz: CW
More than –20 dBm
(except for [USA] and [KOR])
• Modulation system :
SSB
PSN modulation
AM
Low power modulation
FM
Phase modulation
• Spurious emission : More than 60 dB (HF bands)
More than 70 dB (50 MHz band)
• Carrier suppression : More than 63 dB (HF bands)
More than 73 dB (50 MHz band)
• Unwanted sideband suppression: More than 80 dB
• Mic. connector
: 8-pin connector (600
Ω
)
• ELE-KEY connector: 3-conductor 6.35(d) mm (
1
⁄
4
")
• KEY connector
: 3-conductor 6.35(d) mm (
1
⁄
4
")
• SEND connector
: Phono (RCA)
• ALC connector
: Phono (RCA)
M
RECEIVER
• Receive system
: Double-conversion superheterodyne
• Intermediate frequencies:
1st IF frequency
64.455 MHz (Main band)
64.555 kHz (Sub band)
2nd IF frequency
36 kHz
• Sensitivity (Typ.)
:
SSB, CW, RTTY (at 2.4 kHz bandwidth)
0.1–1.799
MHz*1
0.5 µV (10 dB S/N)
1.8–29.99
MHz*1
0.16 µV (10 dB S/N)
50.0–54.0
MHz*2
0.13 µV (10 dB S/N)
AM (at 6.0 kHz bandwidth)
0.1–1.799
MHz*1
6.3 µV (10 dB S/N)
1.8–29.99
MHz*1
2.0 µV (10 dB S/N)
50.0–54.0
MHz*2
1.0 µV (10 dB S/N)
FM (at 15 kHz bandwidth)
28.0–29.99
MHz*1 0.5 µV (12 dB SINAD)
50.0–54.0
MHz*2
0.32 µV (12 dB SINAD)
*1 Pre-amp1 is ON *2 Pre-amp2 is ON
• Squelch sensitivity : (Pre-amp OFF)
SSB/CW/RTTY/PSK31 Less than 5.6 µV
FM
Less than 1.0 µV
• Selectivity
:
SSB/RTTY (at 2.4 kHz bandwidth)
More than 2.4 kHz/–3 dB
Less than 3.6 kHz/–60 dB
CW (at 500 Hz bandwidth)
More than 500 Hz/–3 dB
Less than 700 Hz/–60 dB
AM (at 6 kHz bandwidth)
More than 6.0 kHz/–3 dB
Less than 15.0 kHz/–60 dB
FM (at 15 kHz bandwidth)
More than 12 kHz/–6 dB
Less than 20 kHz/–60 dB
• Spurious and image rejection response ratio:
More than 70 dB
• RIT variable range : ±9.999 kHz
• Audio output power : More than 2.6 W at 10 % distortion
with an 8
Ω
load
• PHONES connector: 3-conductor 6.35 (d) mm (
1
⁄
4
")
• EXT SP connector : 2-conductor 3.5 (d) mm (
1
⁄
8
") 8
Ω
× 2
(for Main and Sub)
M
ANTENNA TUNER
• Output matching range:
HF bands
16.7–50
Ω
unbalanced*1
50 MHz band
20–125
Ω
unbalanced*2
*1 VSWR better than 3:1; *2 VSWR better than 2.5:1
• Minimum operating input power:
HF bands
: 8 W
50 MHz band
: 15 W
• Tuning accuracy
: VSWR 1.5:1 or better
• Insertion loss
: Less than 1.0 dB
(after tuning)
All stated specifications are subject to change without notice or obligation.
SECTION 1
SPECIFICATIONS