![background image](http://html.mh-extra.com/html/icom/ic-756proiii/ic-756proiii_instruction-manual_612299117.webp)
112
16
CONTROL COMMAND
• Command table (continued)
1A
0517
Send/read power-ON timer set
(0000 to 2359)
0518
Send/read power-OFF period
(5=5 min. to 120=120 min. in
5 min. step)
0519
Send/read calibration marker
(0=OFF, 1=ON)
0520
Send/read con
fi
rmation beep
(0=OFF, 1=ON)
0521
Send/read band edge beep
(0=OFF, 1=ON)
0522
Send/read RF/SQL control set
(0=Auto, 1=SQL, 2=RF+SQL)
0523
Send/read quick dualwatch set
(0=OFF, 1=ON)
0524
Send/read quick split set (0=OFF,
1=ON)
0525
Send/read FM split offset (HF)
–4.000 to +4.000 MHz
(see p. 114 for details)
0526
Send/read FM split offset (50 MHz)
–4.000 to +4.000 MHz
(see p. 114 for details)
0527
Send/read split lock set (0=OFF,
1=ON)
0528
Send/read tuner auto start set
(0=OFF, 1=ON)
0529
Send/read PTT tune set (0=OFF,
1=ON)
0530
Send/read antenna selection
(0=OFF, 1=Manual, 2=Auto)
0531
Send/read RTTY mark frequency
(0=1275 Hz, 1=1615 Hz,
2=2125 Hz)
0532
Send/read RTTY shift width
(0=170 Hz, 1=200 Hz, 2=425 Hz)
0533
Send/read RTTY keying polarity
(0=Normal, 1=Reverse)
0534
Send/read RTTY decode USOS
(0=OFF, 1=ON)
0535
Send/read RTTY decode new line
code (0=CR,LF,CR+LF,
1=CR+LF)
0536
Send/read speech language
(0=English, 1=Japanese)
0537
Send/read speech speed (0=slow,
1=fast)
0538
Send/read S-level speech (0=OFF,
1=ON)
0539
Send/read memo pad numbers
(0=5 ch, 1=10 ch)
0540
Send/read main dial auto TS
(0=OFF, 1=Low, 2=High)
0541
Send/read mic. up/down speed
(0=Low, 1=High)
0542
Send/read CI-V transceive set
(0=OFF, 1=ON)
0543
Send/read CI-V 731 mode set
(0=OFF, 1=ON)
16
22
Noise blanker (0=OFF; 1=ON)
40
Noise reduction (0=OFF; 1=ON)
41
Auto notch (0=OFF; 1=ON)
42
Repeater tone (0=OFF; 1=ON)
43
Tone squelch (0=OFF; 1=ON)
44
Speech compressor (0=OFF; 1=ON)
45
Monitor (0=OFF; 1=ON)
46
VOX function (0=OFF; 1=ON)
47
Break-in (0=OFF; 1=semi break-
in; 2=full break-in)
48
Manual notch (0=OFF; 1=ON)
49
RTTY
fi
lter (0=OFF; 1=ON)
4F
Twin peak
fi
lter (0=OFF; 1=ON)
50
Dial lock (0=OFF; 1=ON)
19
00
Read the transceiver ID
1A
00
Send/read memory contents (see
p. 114 for details)
01
Send/read band stacking register
contents (see p. 114 for details)
02
Send/read memory keyer con-
tents (see p. 114 for details)
03
Send/read the selected
fi
lter width
(0=50 Hz to 40/31=3600/2700 Hz)
04
Send/read the selected AGC time
constant (0=OFF, 1=0.1/0.3 sec. to
13=6.0/8.0 sec.)
0501
Send/read SSB TX Tone (Bass)
level (0 =min. to 10=max.)
0502
Send/read SSB TX Tone (Treble)
level (0=min. to 10=max.)
0503
Send/read MONITOR gain (0=min.
to 255=max.)
0504
Send/read CW side tone gain
(0=min. to 255=max.)
0505
Send/read CW side tone gain limit
(0=OFF, 1=ON)
0506
Send/read beep gain (0=min. to
255=max.)
0507
Send/read beep gain limit (0=OFF,
1=ON)
0508
Send/read LCD contrast (0=0% to
255=100%)
0509
Send/read LCD backlight (0=0% to
255=100%)
0510
Send/read LCD horizontal position
(0=1 to 7=8)
0511
Send/read switch backlight (0=1 to
7=8)
0512
Send/read display type (0=A, 1=B,
2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
0513
Send/read display font (0=Basic1,
1=Basic2, 2=Pop, 3=7seg,
4=Italic1, 5=italic2, 6=Classic)
0514
Send/read memory name (0=OFF,
1=ON)
0515
Send/read my call setting (10-char-
acter: see p. 114)
0516
Send/read current time (0000 to
2359)
Command
Sub command
Description
Command
Sub command
Description
16