![Icom IC-756PROIII Instruction Manual Download Page 39](http://html.mh-extra.com/html/icom/ic-756proiii/ic-756proiii_instruction-manual_612299039.webp)
34
4
RECEIVE AND TRANSMIT
D
Convenient functions for transmit
• Speech compressor
(p. 68)
➥
Push
[COMP]
to turn the speech compressor ON
and OFF.
• Pushing
[COMP]
for 1 sec. to select the compression
bandwidth from wide, middle and narrow.
• Transmit quality monitor
(p. 70)
➥
Push
[MONITOR]
to turn the monitor function ON
and OFF.
• Monitor indicator (in
[MONITOR]
switch) lights when
the monitor function is set to ON.
➥
Push
[EXIT/SET]
for 1 sec. then
[(F-1)LEVEL]
to
enter level set mode. Select the monitor level item
with
[(F-1)
Y
Y
]
/
[(F-2)
Z
Z
]
then rotate the tuning dial
to adjust the monitor gain.
• VOX (voice operated transmit)
(p. 66)
➥
Push
[VOX]
to turn the VOX function ON and
OFF.
• “VOX ON” appears when the VOX function is set to
ON.
• Audio tone control
(p. 95)
➥
Push
[EXIT/SET]
for 1 sec. then
[(F-1)LEVEL]
to
enter level set mode. Select an item with
[(F-
1)
Y
Y
]
/
[(F-2)
Z
Z
]
then rotate the tuning dial to adjust
the audio tone.
D
D
About 5 MHz band operation (USA version only)
Operation on the 5 MHz band is allowed on 5 discrete
frequencies and must adhere to the following:
• USB mode
• Maximum of 50 watts ERP
(Effective Radiated Power)
• 2.8 kHz bandwidth
It is the operator’s responsibility to set all controls so
that the transmission in this band meets the stringent
conditions under which we may use these frequencies.
NOTE:
We recommend that you store these fre-
quencies, mode and
fi
lter settings into the memory
channel for easy recall.
*The channel center frequencies that are speci
fi
ed
by the FCC, show the center frequency of their
passband. However, the IC-756PROIII displays
carrier point frequency, so set 1.5 kHz below from
FCC channel center frequency.
4
IC-756PROIII Tuning
FCC Channel
Frequency*
Center Frequency*
5.33050 MHz
5.33200 MHz
5.34650 MHz
5.34800 MHz
5.36650 MHz
5.36800 MHz
5.37150 MHz
5.37300 MHz
5.40350 MHz
5.40500 MHz
To assist you in operating the 5 MHz band correctly
within the rules speci
fi
ed by the FCC, transmission
is impossible on any 5 MHz band frequency other
than the 5 frequencies indicated in the table above.