![background image](http://html.mh-extra.com/html/icom/ic-756proiii/ic-756proiii_instruction-manual_612299021.webp)
16
2
INSTALLATION AND CONNECTIONS
2
■
Power supply connections
Use the optional PS-125 DC power supply with a 25 A
capacity when operating the transceiver with AC
power. Refer to the diagrams below.
CAUTION:
Before connecting the DC power
cable, check the following important items. Make
sure:
• The
[POWER]
switch is OFF.
• Output voltage of the power source is 12–15 V
when you use a non-Icom power supply.
• DC power cable polarity is correct.
Red
: positive
+
terminal
Black
: negative
_
terminal
CONNECTING A DC POWER SUPPLY
to DC power
socket
A DC power supply
AC outlet
AC cable
30 A fuses
Supplied
DC power cable
13.8 V; at least 23 A
Black
_
Red
+
Transceiver
CONNECTING A VEHICLE BATTERY
12 V
battery
Supplied
DC power cable
+
red
_
black
Crimp
Solder
Grommet
NOTE:
Use terminals for
the cable connections.
R
WARNING NEVER con-
nect
to a battery without supplied
DC fuses, otherwise a fire hazard
may occur.
NEVER connect
the transceiver
directly to a 24 V battery.
IMPORTANT!
Detailed installation
notes for Icom mobile transceivers to
be fitted into vehicles are available.
Contact your Icom dealer or distribu-
tor.
CONNECTING PS-125 DC POWER SUPPLY
PS-125
Connect to an AC outlet
using the supplied AC cable.
DC power cable
DC power
socket
Transceiver